Tough Dog Front Shocks - IFS 100 Series
FOAM CELL
The ‘Foam Cell’ that makes all the difference is a micro-cellular foam insert that helps to drastically reduce the effects of shock fade, allowing your shocks to perform better for longer, even on the harshest of corrugations. Cavitation and Aeration are the undoing of any shock absorber. As the shock is worked harder, the oil and gas in the outer chamber begins to mix and form bubbles, lowering the viscosity of the oil. When this aerated oil passes through the valve, there is reduced resistance, stopping the shock form performing correctly. The Foam Cell insert, with its trapped gas micro cells takes up the empty space in the shock normally taken up by air or nitrogen gas. This eliminates the possibility of bubbles forming, allowing the shock to get on with the job with an unparalleled resistance to shock fade.
- Large 41mm internal bore
- Twin tube design
- High temperature, all weather oil
- 18mm, double chrome-plated rod
- Additional welding on all studs & eyerings
- Multi stage Velocity Sensitive Valving
- Rod wiper seal and multi lip seal
- Hydraulic rebound stop
- 3 Year / unlimited km warranty (Conditions Apply)
BIG BORE 53mm 'RALPH'
The Ralph shock has a massive 53mm bore and 22mm chrome piston rod, all housed in a 70mm casing. These big dogs carry so much oil, they will run cool over even the toughest of terrain. If you drive a fully laden off road tourer, these are the shocks for you.
- Huge 53mm bore
- Twin tube design
- High temperature, all weather oil
- 22mm double chrome-plated rod
- Additional welding on all studs & eye rings
- Multi stage Velocity Sensitive Valving
- Rod wiper seal and multi lip seal
- Hydraulic rebound stop
- 3 Year / unlimited km warranty recreational use (Conditions Apply)
- 3 Year / unlimited km warranty commercial use (Conditions Apply)